New Page 3
Bantam Product Reviews:
Balance Tap Config Guide
PowerEdge Lipo Product Reviews
6S 5000 30C RC Heli Resource Review - NEW!
3S 2200 30C RC Heli Resource Review
PowerEdge 3S 2200 30C HeliGeek
PowerEdge Lipo Discharge Graphs
PowerEdge Lipo Video's
PowerEdge 2600 TX Pack Video Review - NEW!
PowerEdge 7S 5000 in EF
Extra EXP - NEW!
Tareq Al Asaasi flies
PowerEdge in Protos - NEW!
PowerEdge 6S 5000 30C T-Rex 600 Video
PowerEdge 3S 2200 30C in Sapac F-16
Kit Installation Demo
BM12 12S Color TFT Lipo Battery Monitor & Alarm
Units Available: 35
The Chargery Battery Saver BM12 is the first up to 12S LiPo & LiFe battery
saver with a full TFT color LCD. A bright red LED and two loud beepers (95Db)
make sure of your flight safety. Warning voltage, delay time and warning time
can be established by pressing a button. The large TFT color LCD display can
display each cell's voltage from 2S-12S. During flight, the BM12 can sound
warning or LED warning if any cell voltage reaches a user defined preset to
prevent a over discharge. The Bm12 will also record the lowest cell voltage
during flight which can be checked after the flight is completed. During
charging, the BM12 will monitor the cells voltages and if any cell reaches 4.22V
or over, sound the alarm.
The BM12 will record the lowest voltage of any cell, including the total pack
voltage during flight. After the flight is completed, the UP button can be
pressed to display the recorded low voltage cells. Pressing the DOWN button will
display current cell voltages. An auto off function will engage after 2 minutes
to save battery power. At any time, you can press any button resume display.
Battery range: 2S-12S LiPo & LiFe battery pack
Over charge Alarm cell voltage: > 4.22V per cell
Over discharge warning cell voltage: 2.00~4.00V step 0.05V,
Delay time when start to warn: 0.0S~20S, step 0.5 second,
Warning time range:1S~60S, step 1 second, default
Accurate scope of the warning voltage: -20mV/+20mV
Pins distance: 2.54mm
Size:50*43*6 ( L*W*T, mm)
Warning LED: 11000mCd, @ 2.0V, 20mA
Two Warning beepers: 95dB @ 12V, 25mA per beeper
Package: transparent heat shrink tube
Customer Product Reviews
7/28/2012 6:05 AM
I wanted to monitor my lipo batteries in flight and this was the only device that I found that can do it for my 700 helicopter. Works as advertised.
Bantam e-Station charger
Highest Level of
Click Above to view