New Page 3
Bantam Product Reviews:
Balance Tap Config Guide
PowerEdge Lipo Product Reviews
6S 5000 30C RC Heli Resource Review - NEW!
3S 2200 30C RC Heli Resource Review
PowerEdge 3S 2200 30C HeliGeek
PowerEdge Lipo Discharge Graphs
PowerEdge Lipo Video's
PowerEdge 2600 TX Pack Video Review - NEW!
PowerEdge 7S 5000 in EF
Extra EXP - NEW!
Tareq Al Asaasi flies
PowerEdge in Protos - NEW!
PowerEdge 6S 5000 30C T-Rex 600 Video
PowerEdge 3S 2200 30C in Sapac F-16
Kit Installation Demo
Bantam e-Station Two-Meter
Units Available: 37
Select Optional Connection Board
Optional Connector (not installed)
New Page 2
Not sure which balance connection board you need?
Here is our Balance
Tap Configuration Guide
|| max. 60V
|Max. current (Watt-meter)
|Min. operating voltage
|Power consumption (Battery checker)
|| approx. 20mA
|| 2~6S LiXX
900 ~ 1500 ~ 2100 us
Opto / BEC,
|| 110x60x23 mm
Review of the e-Station TWO-Meter
Now includes the Balance Connection Board
EAC124 for JST XH style batteries!
TWO-METER is a very
sophisticated electronic device that controlled by high performance
microprocessor and precise resistors. It has three functions of ‘watt-meter’,
‘battery checker’ and
self-balancer. Those functions are essential for electric flyers to ensure safe
battery condition and to
measure the electric consumptions of the power system. And also, the built-in
equalize the individual voltages instantly.
TWO-METER can handle all types of Lithium batteries(LiPo, LiIo, LiFe)
consisting of serial-wired cells,
but the battery pack has to have a balancing plug for checking voltages.
- Watt-meter program
The Watt-meter circuit can measure the electric current up to 100A.
You can verify the electric
consumptions on your power system. You can drive the ESC without radio and
receiver, using integrated signal generator.
- Battery checker
TWO-METER can show you the voltage and residual capacity of your
Lithium battery pack with its
individual voltage of each cells.
TWO-METER has an integrated self-balancing circuit which is
self-operative without linking to charger.
When you connect the battery pack to the individual port of the device the
balancing job will be started
instantly. In this case the individual cell voltages will be equalised to the
lowest cell voltage of the
- Servo Drive / Test
TWO-METER has a integrated signal generator to drive the servo. In
'Watt' menu, you can control the
servo by increments or decrements of signal. To drive the servo, a battery pack
of 4.8V is necessary in
connection of Y-harness.
Connection to TWO-METER
The TWO-METER connects
to the lithium battery via the balance connector on the battery. The Bantam EAC124 boards for JST XH style batteries is INCLUDED. Optional boards incude connection to
Thunderpower/Flightpower, Polyquest/Hyperion, and Kokam batteries. This covers more than
98% of lipo batteries on the market. For a complete listing of known lipo battery brands
and their supported battery taps, click here.
Customer Product Reviews
6/12/2012 12:25 AM
I use this ALOT! GREAT product
Bantam e-Station charger
Highest Level of
Click Above to view