|
The Bantam BC6 has been replaced with the BC6DXII.
Not
sure which balance connection board you need?
Here is our Balance
Tap Configuration Guide
- Included Connection Balance Board
The BC6DX-II includes the 2S
through 6S balance board for JST-XH balance taps. Optional balance taps include EAC129
for Thunderpower / Flight Power, EAC123
for Hyperion / Polyquest, and EAC128
for Kokam / Graupner. See our Balance Tap
Configuration Guide if you are not sure what balance board you need.
- Dual input power
BC6DX-II employs a circuit
that can be operated at AC (Alternating Current) or DC (Direct Current) input power. On AC
power the charger’s maximum output power is 50W charging. With DC power input, the
charger’s maximum output power is 90W. As a result, it can charge up to 15 cells of
NiCd/NiMH and 6 series of Lithium batteries. There may be the limit of feeding current to
a higher voltage battery. Please refer 'Maximum circuit power chart'.
- Individual voltage balancer for
Lithium batteries buit in
The BC6DX-II has an individual-cell-voltage
balancer built in. So it does not need an external balancer when charging Lithium
batteries (LiIo/LiPo/LiFe) for cell balancing.
- Balance individual cells on
discharge
The BC6DX-II also can monitor and balance
individual cells on Lithium batteries during the discharge process. If the voltage of any
one cell varies abnormally, the process will be stopped with an error message.
- Accept various types of Lithium
chemistries
The BC6DX-II can accept three types of Lithium
batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry.
- Lithium battery 'Fast' and 'Storage' mode
'Fast' charge reduces the charging time of Lithium batteries and 'Storage mode controls the final voltage of the battery
for long time storage.
- Data store/load
Up to 10 data memories.
Each memory can be recalled at any time you need without reprogramming.
- Cyclic
charging/discharging
Perform 1 to 10 cycles of
charge>discharge or discharge>charge continually for battery refreshing and
balancing.
- PC based analysis using
USB communication
BC6DX-II offers PC based
program can analysis the characteristic of the battery via USB port. It shows a graph of
voltage, current, capacity and temperature curves. It also shows the individual voltage of
each cell in the Lithium battery pack. The firmware can be upgraded from internet
download, when the newer version is released. Optional part # EAC400 is required.
- Robust outer aluminum case
& Cooling Fan
High-quality aluminum case is
durable and very efficient to cool out the internal heat as well as built in cooling fan.
Additional Information
BC-6DX-II Manual |